TEL
+86 13609288011

YBSS series flameproof three-phase asynchronous motor for conveyor
YBSS series conveyors explosion proof three-phase asynchronous motors are special motors for driving bendable scraper conveyors, belt conveyors or other equipment in coal mines. The explosion-proof performance of the motor is in accordance with GB3836.1-2010 “Explosive Atmosphere Part 1: General Requirements for Equipment” and GB3836.2-2010 Explosive Atmosphere Part 2: Equipment Protected by Flameproof Enclosure “d”. Its explosion-proof mark is “Ex d I Mb” (“Exd I”-before 2010). It is suitable for the place where the explosive gas mixture of methane or coal dust exists.
YBSS series conveyors explosion proof three-phase asynchronous motors are special motors for driving bendable scraper conveyors, belt conveyors or other equipment in coal mines. The explosion-proof performance of the motor is in accordance with GB3836.1-2010 “Explosive Atmosphere Part 1: General Requirements for Equipment” and GB3836.2-2010 Explosive Atmosphere Part 2: Equipment Protected by Flameproof Enclosure “d”. Its explosion-proof mark is “Ex d I Mb” (“Exd I”-before 2010). It is suitable for the place where the explosive gas mixture of methane or coal dust exists.
| Y B S S | 250 – 4G |
|---|---|
| Y B | Asynchronous motor, flameproof type |
S- Conveyor
S- Water cooling
250 - Power(kW)
4- Poles
G- Plateau
Ex dⅠMb
Ex–Explosion Protection Mark
d–Type of Explosion Protection(Explosion-proof Type)
| Ⅰ | Electrical Apparatus Class(ClassⅠ) |
|---|---|
| Mb | Equipment Protection Degree |
Basic parameters:
| Rated voltage | 660/1140V, 1140V, 3300V |
|---|---|
| Rated frequency | 50Hz |
| Rated power | 160 - 1600kW, 110/55 - 1000/500kW |
| Number of poles | 4, 4/8 |
| Thermal classification | 180(H) |
| Temperature rise limit | 135K |
| Installation method | IMB10, IMB5, IMB3, IMB35 |
| Protection level | IP55 |
| Cooling method | IC3W7 |
| Ambient air temperature | 0 - +40℃ |
| Operation mode | S1 |
| Altitude | ≤1000mm |
Indoor (standard configuration)
Explosion-proof mark (standard configuration): Exd I Mb
For each order we can provide the technical data sheet, outline drawing, routine test report and, for explosion-proof motors, a copy of the Ex certificate that matches the nameplate marking. Tell us in the inquiry which documents your project or your inspector requires, so they are prepared before shipment.
For a fast, accurate quotation please send: rated power (kW), voltage and frequency, number of poles or speed, Ex marking or hazardous zone, mounting type, quantity and destination port. For a replacement, a photo of the old motor nameplate is the quickest way to match it.
Yes. Wolong Nanyang explosion-proof motors, both low-voltage and high-voltage, are available with ATEX and IECEx certificates for Europe and international projects, and GOST for the Russian market. Tell us which certificate you need when you ask for a quote.
Yes. For new projects we quote and select the model to your requirements. For a replacement, please send a nameplate photo or outline drawing of the old motor, and we will match the shaft height, mounting and installation dimensions.
Yes. Schorch, Brook Crompton and Morley belong to the Wolong Electric Group, and we can supply Wolong motors built to replace them, matched to your mounting dimensions.
Yes. We ship worldwide on CIF terms, or you can use your own forwarder. The usual production time is about 3 months, depending on the model and quantity.
Rated power (kW), voltage and frequency, number of poles or speed, Ex marking or hazardous zone, mounting type (e.g. B3, B35, V1), quantity and destination port. A nameplate photo of the old motor helps if it is a replacement.
Send us your requirements. An engineer will reply with a model check and price within 24 hours.