In the process of handling motor application problems, it was found that some motor users did not fully understand the installation requirements of the motor, which may cause some problems. First of all, the installation space of the motor should ensure the basic requirements of motor ventilation, heat dissipation, installation and maintenance. When the motor installation space is too small and not ventilated, the ambient temperature will increase when the motor is running, which in turn will increase the temperature rise of the motor and reduce the reliability. In addition, enough space should be left to facilitate the later maintenance of the motor. Second, the installation foundation of the motor should be firm, and there should be no factors that increase the vibration of the motor. There was once a motor user who had a broken shaft problem after a short period of use. Because the distance was relatively long, the manufacturer directly replaced the new machine; the motor had a broken shaft problem again in a short time; the manufacturer's on-site service found that the motor was installed on a relatively thin metal frame, and there was obvious jumping when the motor was running. After communicating with the user and strengthening the foundation, the problem was solved.

Third, the reliability of the power connection. When installing the motor, you should select a cable that meets the requirements according to the instructions in the manual, mainly the conductive cross-section and voltage level of the cable, as well as the anti-corrosion requirements for special environments. Check the tightness of the connectors regularly according to the frequency of use of the motor, especially when the motor is frequently started and stopped, and pay special attention to it. The tightening and anti-loosening measures should not be ignored during motor maintenance. The after-sales service personnel of the motor said that many motors have heating of the terminal board and even burning of the lead wires and terminals due to connection problems. If such problems can be paid attention to in the daily maintenance of the motor, the probability of the problem will be greatly reduced. Fourth, the compliance of the applied voltage with the rated voltage. For some dual-voltage motors, the power supply should be connected according to the actual connection method of the motor and the corresponding voltage should be applied. If the voltage is higher than the rated voltage, it is likely to cause the motor winding to burn in a short time.
Motor installation method,Flameproof three-phase asynchronous motor-Wolong Nanyang Explosion Protection
