TEL
+86 13609288011
Low Voltage Induction Motors
WXF High-Temperature Smoke Exhaust Fan Motor
Wolong WXF High-Temperature Smoke Exhaust Fan Motor: 0.18-315 kW, 220/380V;230/400V,400/690V, H80-H355, 2P/4P/6P, IP55. Quote within 24 hours.
- Genuine Wolong Nanyang motor with original factory documents
- ATEX / IECEx certificates available for explosion-proof models
- Quotation and model check within 24 hours
- Shipping worldwide by sea or air, CIF or with your forwarder
Product Description
Product Detail
WXF high temperature motor has the ability to withstand high temperature fire test, meets S1 and S2 operating conditions: under normal circumstances can be used as general motor , long-term continuous operation; In case of emergency smoke and smoke exhaust, starts S2 short-time operation. If the ambient temperature is up to 400ºC, reliable operation for 2 hours, in line with the emergency working conditions of high temperature fire motor.
This series of motors has the characteristics of low loss, low vibration, safety and reliability, easy maintenance and so on.
Implementation standards
WXF high temperature motor is an energy efficiency upgrade product independently developed by Wolong Nanyang. Its efficiency meets the IEC60034-30-1 c. Installation dimensions conform to IEC standards.
Model reference
WXF3-160L-2
| WE3 | Energy efficiency level IE3 |
|---|---|
| 160 | Center height |
L: Base length
2-Pole
Basic parameters
| Frame size | H80-H355 |
|---|---|
| Power | 0.18-315 kW |
| Frequency | 50Hz |
| Voltage | 220/380V;230/400V,400/690V |
| Pole | 2P/4P/6P |
| Protection Grade | IP55 |
| Cooling Method | IC411 |
| Insulation | F |
| Service | S1-S2 |
| Ambient temperature | custom made |
| Altitude | ≤1000m |
| Bearing | Chinese/SKF/FAG/NSK available |
| Mounting | IMB3 |
Operating condition
Normal temperature
| Ambient air temperature | -20℃ - +40℃; |
|---|---|
| Altitude | ≤1000m; |
| Note | When the ambient air temperature, altitude and the above provisions do not at the same time according to the provisions of GB755; |
| Humidity | monthly average maximum relative humidity does not exceed 90%. |
Mounting
Documents Supplied with the Motor
For each order we can provide the technical data sheet, outline drawing, routine test report and, for explosion-proof motors, a copy of the Ex certificate that matches the nameplate marking. Tell us in the inquiry which documents your project or your inspector requires, so they are prepared before shipment.
Related Products
- WE3 Low-Voltage High-Efficiency Three-Phase Motor
- Low vibration and low noise three-phase asynchronous motor
- Low voltage high speed three-phase asynchronous motor
How to Order
For a fast, accurate quotation please send: rated power (kW), voltage and frequency, number of poles or speed, Ex marking or hazardous zone, mounting type, quantity and destination port. For a replacement, a photo of the old motor nameplate is the quickest way to match it.
Frequently Asked Questions
Do your explosion-proof motors have ATEX and IECEx certificates?
Yes. Wolong Nanyang explosion-proof motors, both low-voltage and high-voltage, are available with ATEX and IECEx certificates for Europe and international projects, and GOST for the Russian market. Tell us which certificate you need when you ask for a quote.
Can this motor replace my existing motor?
Yes. For new projects we quote and select the model to your requirements. For a replacement, please send a nameplate photo or outline drawing of the old motor, and we will match the shaft height, mounting and installation dimensions.
Can you supply replacements for Schorch, Brook Crompton or Morley motors?
Yes. Schorch, Brook Crompton and Morley belong to the Wolong Electric Group, and we can supply Wolong motors built to replace them, matched to your mounting dimensions.
Can you ship to my country, and what is the lead time?
Yes. We ship worldwide on CIF terms, or you can use your own forwarder. The usual production time is about 3 months, depending on the model and quantity.
What information do you need for a quotation?
Rated power (kW), voltage and frequency, number of poles or speed, Ex marking or hazardous zone, mounting type (e.g. B3, B35, V1), quantity and destination port. A nameplate photo of the old motor helps if it is a replacement.
Get a Quote for WXF High-Temperature Smoke Exhaust Fan Motor
Send us your requirements. An engineer will reply with a model check and price within 24 hours.
